Hibakódmutató · high
P0706
Transmission range sensor circuit – no signal; incorrect signal(s)
Transmission range sensor circuit – no signal; incorrect signal(s)
Documented for: 2.0L gasoline; 2.5L/3.0L gasoline · System(s): TRANS EOBD, TRANS OBD II · Factory MIL flag: 2 · Default action: TCM Default: –4, 3, 2 Cannot be selected –No J Gate illumination –Reverse disengaged above 10 km/h (6 mph) (Poor shift quality)
Common causes
- J-Gate adjustment incorrect Selector cable adjustment / installation incorrect Range sensor incorrect installation / adjustment Range sensor to TCM circuit(s): open circuit, short circuit to ground TCM Ground circuit: open circuit, high resistance Range sensor failure
- J Gate – incorrect setting Selector cable adjustment / installation incorrect Range sensor incorrect installation / adjustment Range sensor to TCM circuit(s): open circuit, short circuit to ground TCM Ground circuit: open circuit, high resistance Range sensor failure
Quick checks
- Confirm freeze-frame and conditions when the code set
- Inspect connectors, grounds, and harness for the circuit named in the code
- Compare live sensor values vs expected (unplugged/biased sensors are common)