Rejstřík chybových kódů · medium
P0105
MAP Sensor circuit malfunction
MAP Sensor circuit malfunction
Documented for: 2.0D; 2.0L gasoline; 2.5L/3.0L gasoline · System(s): EMS/diesel, EMS EOBD, EMS OBD II · Factory MIL flag: 2 · Default action: ECM Default: –Default value of 1.013 BAR (29.92 in hg) used
Common causes
- MAP sensor/circuit fault
- MAP sensor failure
- MAP Sensor to ECM circuit(s) fault MAP Sensor failure
Quick checks
- Confirm freeze-frame and conditions when the code set
- Inspect connectors, grounds, and harness for the circuit named in the code
- Compare live sensor values vs expected (unplugged/biased sensors are common)
Typical fixes
- Check MAP wiring/connector and reference/ground
- replace MAP sensor if proven faulty.